Home
Products
Manufacturers
Honda Engines
Industrial Engines
Hydraulic Power Units
Yamaha Generators
Industrial Generators
Contractor Generators
Industrial Vacuums
Pressure Washers
Dump Bed Kits
Hydraulics 101
About Us
Catalog
Company Policies

View Cart
Checkout
 

GILLETTE PORTABLE GENERATORS

 Power-Pro Series

Compact Power-Pro portable generator sets from
2.2 KW to 6.5 KW with heavy duty HONDA
overhead valve design engines.

 

A good, economical portable gasoline engine driven generator for those standard duty applications, such as recreational activities, camping, picnics, standby power, or any other occasional emergency electric power applications.

Honda engines bring instant brand recognition and confidence in a heavy duty reliable engine service life.  This engine has an un-equaled network of reasonably priced parts and service, through out the world.

For those who want a reliable and easy to operate generator, and still have heavy duty features but at the lowest "Dollar per KW" price, then POWER-PRO is your best choice.  Following are the (6) exclusive features, found on all Gillette portable generator sets. The remaining features are randomly found on other competing generator sets.

 

  • EXCLUSIVE, "KLEEN-POWER" design allows only 7% harmonic distortion of the generated power sine-wave.  Harmful harmonic distortions over 10% may do damage to your plugged-in electric load.
  • EXCLUSIVE, "POWER-ASSIST" design allows 35% more copper wire and electrical grade steel laminations than leading competitor gen-sets.  This gives you huge (50% surge over rated kw), extra starting power for hard starting electrical motors.
  • EXCLUSIVE, HEAVY DUTY DIODES gives you a "life time warranty" from failure on the most frequently replaced part on other brand gen-sets.
  • EXCLUSIVE, HEAVY-DUTY CAPACITOR gives you "Life-Time" warranty from failure on the second most commonly replaced part on other brand gen-sets.
  • EXCLUSIVE, AUTOMATIC LOAD BALANCE eliminates load chatter and excessive vibration due to unbalanced electric loads.
  • EXCLUSIVE, INSULATION DESIGN gives you superior insulation against un-wanted heat for a longer lasting winding.

     

    • CIRCUIT BREAKERS automatically protect generator from overloads and "short circuited" electric loads.
    • OVER-HEAD VALVE engine gives you 20% smaller size and lighter weight, than less efficient side valve engines.  OHV design also reduces fuel and oil consumption by 40%, give you up to 10% more torque, and meets EPA and C.A.R.B. clean exhaust requirements for 2002.
    • CAST IRON CYLINDER SLEEVE allows easy starting, trouble free operation, and longer service life.
    • AUTOMATIC OIL SENSOR protects your engine from low oil level and automatically stops engine before damage happens.
    • SOLID STATE IGNITION allows trouble free operation with no points or condenser to replace.
    • 2-ELEMENT AIR CLEANER adds major additional engine life, by stopping more contaminants.
    • ROPE-RECOIL STARTING is easy and simple with its unique automatic engine compression release.
    • EXTENDED RUN 4 GALLON fuel tank with filter, valve and fuel gauge, allows extended continuous run on 3kw to 6.5kw sets.
    • 2 WHEEL DOLLY is available as option from 3kw to 6.5kw.
    • 50 HERTZ POWER is available as option for off-shore gen-sets.
    • HONDA Heavy Duty engines standard on all generators (2 year engine warranty).
POWER-PRO by GILLETTE, is a reliable and dependable electric power to go anywhere.  These lightweight and compact generators are designed for commercial duty applications and they will let you plug into, clean electric power, virtually anywhere, anytime.

 

Generator Models

PP - 30H

PP - 40H

PP - 50H

PP - 50EH

PP - 65

PP - 65EH

Maximum KW 3.0 4.0 5.0 5.0 6.5 6.5
Prime KW 2.5 3.2 4.5 4.5 6.0 6.0
Prime Amps @ 120V. 21 26 38 38 50 50
Prime Amps @ 240V. N/A 13 19 19 25 25

 

SPECIFICATIONS FOR POWER-PRO, STANDARD DUTY PORTABLE GENERATORS, FOR STANDARD DUTY APPLICATIONS.
ALL SETS ARE GASOLINE FUELED WITH EXTENDED RUN FUEL TANKS

GENERATOR MODELS

SINGLE PHASE, 120/240 VOLTS, 60 HERTZ

PP - 30H PP - 40H PP - 50H PP - 50EH PP - 65H PP - 65EH
GENERATOR REGULATION ALL MODELS : PLUS OR MINUS 5% FROM NAMEPLATE RATING
FREQUENCY REGULATION ALL MODELS : PLUS OR MINUS 5% FROM NAMEPLATE RATING
"KLEEN-POWER" TM ALL MODELS : WAVEFORM DISTORTION AVERAGES 6% - 7%
ENGINE BRAND HEAVY DUTY HONDA OVERHEAD VALVE DESIGN
ENGINE MODELS GX160 GX200 GX270 GX270 GX390 GX390
ENGINE STARTER ROPE RECOIL ROPE RECOIL ROPE RECOIL ROPE & ELECTRIC ROPE RECOIL ROPE & ELECTRIC
ENG. HP/3600 RPM 5.5 6.5 9.0 9.0 13.0 13.0
ENG. CU. CENTIMETER 160 196 270 270 389 389
ENGINE CYLINDERS ALL MODELS : SINGLE CYLINDER WITH CAST-IN IRON CYLINDER WALL
LOW OIL PROTECTION ALL MODELS : STANDARD ENGINE SHUT-DOWN PROTECTION
db(A) AT 7 METERS 73 74 76 76 77 77
FUEL TANK (GAL.) 4 4 4 4 4 4
3/4 LOAD RUN TIME (HRS.) 10 9 6.7 6.7 4.7 4.7
FUEL USE (GAL/HR) .40 .44 .60 .60 .84 .84
CODE G, ELECTRIC MOTOR STARTING POWER 1 HP 1 HP 1.5 HP 1.5 HP 2 HP 2 HP
2 WHEEL DOLLY PART NO. G-12, TWO WHEEL DOLLY "KIT" IS AVAILABLE AS OPTIONAL EQUIPMENT
MAIN CIRCUIT BREAKER ALL MODELS : MAIN CIRCUIT BREAKER PROTECTION
VOLTMETER & HOURMETER ALL MODELS : INSTRUMENTS ARE NOT AVAILABLE ON THIS LINE
120 VOLT RECEPTACLES (4) NEMA 5-15R, STANDARD STRAIGHT BLADE RECEPTS WITH U-GROUND
120/240 VOLT RECEPTACLE N/A (1) NEMA L14-20R TWIST-LOCK (1) NEMA L14-30R TWIST-LOCK
LENGTH, INCHES 26 26 26 28 28 28
WIDTH, INCHES 20 20 20 22 22 22
HEIGHT, INCHES 21 21 21 22 22 22
NET WEIGHT (LBS.) 129 132 167 193  193 208 
SHIP WEIGHT (LBS.) 145 148 183 209 209 224
CU.FT. AREA - SHIP BOX 10 10 10 10 10 10

GENERATOR DESIGN : Applications are for standard duty, consumer use, such as camping, recreational, or standby power during normal power blackouts.  The generator-set is equipped with large fuel tank for extended run use, receptacle panel for power take-off and full wrap-around protective carry frame.  A 1-year limited warranty is offered on these POWER-PRO sets. 

Part No G-12 two-wheel dolly kit fits on all models.

 

PORTABLE GENERATOR SET ACCESSORIES

 

ITEM NO.

ITEM Description
- 3 3 Phase, 60 Hertz
Special Winding
Special 3 phase winding on any generator for 208, 220, 240, or 480 volts (select only one voltage at time of order) 3 phase power with load terminal strip located in control panel. Generator ratings are shown in KVA, based on .8 power factor. (For BDN, GPN, GPND, and GPWD models only, 7.5 kw to 15 kw gen-sets.)
- 5 50 Hertz Winding for 2-Pole, 3000 RPM sets Special winding allows any model to produce voltage at 50 hertz. For use in certain sections of the world that have this type of power. Derate 60 hertz wattage and amp ratings by 15%. Speed is reduced to 3000 rpm.
G10 3 Phase Receptacle (for mounting on panels for 6.5 thru 16kw) All 3 phase windings are equipped with a load terminal strip for permanent wired installations. A 4-wire, 3 phase receptacle is mounted flush on panel for portable (or easy power take-off) applications. A matching male plug is furnished loose for complete set. 
G12 Two-Wheel Dolly Kit Kit is shipped disassembled and has axle, handles, and 2 full pneumatic wheels, size 10" dia. x 4" wide. Fits all GPN, GPND, and PP portable generators, 3.0 to 7.5 kw. All larger sizes, 9.0 kw thru 15 kw, have built in 2 wheel full pneumatic 10” tires & lifting hook supplied as standard equipment.
G13 Ground Fault Circuit Interrupter (GFCI) for
240 Volt Circuits
OSHA requires GFCI "Shock Protection" on all electrical, 120 VAC circuits at job-site.  We provide this protection on all Gen-Pro sets.  However, certain applications require this GFCI protection on the 240 VAC circuits. This is now available as an option, to protect all 120 and 240 Volt receptacles.
G14 Remote START-STOP Control Panel (G-15A) 3 button START-STOP Panel for all Kubota diesel engines with pre-heat starting.
G18 Loose Male Cap Plug to fit Mounted Generator Receptacles G15-1 NEMA Number 5-15P = 15 AMP, 120 Volt, 1 Phase, 3 Wire Male Cap
G15-2 NEMA Number 5-20P = 20 AMP, 120 Volt, 1 Phase, 3 Wire Male Cap
G15-3 NEMA Number L5-30P = 30 AMP, 120 Volt, 1 Phase, 3 Wire Male Cap
G15-4 NEMA Number L14-20P = 20 AMP, 120/240 Volt, 1 Phase, 4 Wire Male Cap
G15-5 NEMA Number L14-30P = 30 AMP, 120/240 Volt, 1 Phase, 4 Wire Male Cap
G15-6 NEMA Number 14-30P = 30 AMP, 120/240 Volt, 1 Phase, 4 Wire Male Cap
G15-7 NEMA Number 14-50P = 50 AMP, 120/240 Volt, 1 Phase, 4 Wire Male Cap
G15-8 NEMA Number 14-60P = 60 AMP, 120/240 Volt, 1 Phase, 4 Wire Male Cap


Phone 406-761-8079 or 800-823-4937
Fax 406-452-6056

Email  sales@northernhydraulics.net

Northern Hydraulics Inc.
2600 17th St NE
Black Eagle, MT 59414