4Z4306-3

Click to Order

1V1701

Click to Order

SS SERIES Sectional

This valve offers unique versatility in a compact, yet rugged valve with extremely low leakage and exceptional load holding capability. Each section incorporates threaded "in" and "out" ports so it may be utilized alone ... or stacked for multiple functions. It is large enough to accommodate quick disconnect fittings in the ports and an inlet relief section may be added when required. The SS is ideally suited to the landscape grooming and lawn and garden industries as well as the expanding mobile market.

• 3500 PSI operating pressure.
• Open (tandem) center.
• 9/16-18 (SAE #6) inlet, outlet and work ports.
• Outlet may be used to run other valves downstream.
• Load checks to prevent reverse flow when shifting
  out of neutral in lifting applications.
• Optional single handle actuator with protective boot.
• Body Section weight - 7 lb.
• 7 GPM flow rating .
• Series operation.

PRE-ASSEMBLED UNITS

The CROSS SBA series is a  3-pos., 4 way valve in 1,2 or 3 spool versions with float available. The SBS series features 12 volt solenoid (3-position, 4 way). Fully balanced select-fit honed spools with excellent metering characteristics give maximum load holding capability and long life.

• 2500 psi operating pressure, for SBA (3000 psi for SBS)
• 30 gpm flow rating
• SBA: 3/4" NPTF in & out, 1/2" NPTF work ports
• SBS: SAE ports, 1 1/16-12 in and out & 3/4-16 work ports
• Adjustable built-in relief set at 2000 psi
• Open center, spring centered
• Built-in load checks for lifting
• Field conversion kits:

1V0208    Power beyond sleeve (3/4" NPTF)
1V2015    Closed center kit (1V0206 & 1R0035)
1V1485-02    Single handle actuator for SBAF2 & SBA22

 

Applications:

*  For operating double acting cylinders or a reversible hydraulic motor.

**  Float position allows a loader, snow plow or dozer blade to ride the contours of the ground as the machine moves forward.

The CROSS CONVERTA can be easily converted to a 3 way valve by using the conversion plug and port pipe plug supplied with the valve. It can also be converted to a 3-position detent valve with a separate detent kit: Part number 1 VO294. This valve may be used to operate a double or single acting cylinder, or a reversible or one direction motor when a hold position in neutral is required.

NOTE: Not intended for use in metering circuits.

• 2000 psi Maximum operating pressure.
• 25 gpm flow rating
• 3/4" NPTF in & out
•  1/2" NPTF work ports
• Built-in relief (preset at 1500 psi, 10gpm)
• Weight 9 lbs.

The CROSS SCA series is a rugged and dependable low cost valve. It is a series type recommended for all general purpose applications except lifting heavy loads in a vertical position. It will operate a double acting cylinder or a bi-directional motor required to hold a load in neutral.

• Single spool, 3 pos., 4-way
• 1500 psi fixed relief.
• 30 gpm flow rating
• 3/4" NPTF in & out
•  1/2" NPTF work ports
• Low leakage spool.
• Weight 9 lbs.

The CROSS SBC2S series is a manually adjustable, pressure compensated, priority-type Flow Divider combined with pressure relief. It provides accurate speed and directional control of motors and cylinders or will operate two separate systems from one pump

• Single spool flow divider
• 2500 psi operating pressure.
• 25 gpm flow rating
• 3/4" NPTF in & out
•  1/2" NPTF work ports
• Output volume adj. (0-25gpm)
• Weight 19 lbs.

The CROSS SA series valve offers differential style relief, load checks, and excellent metering in a compact, economical model with parallel flow paths.

• 3000 PSI operating pressure
• 15 GPM flow rating
• 7/8-14 (SAE#10) inlet and outlet ports
• 3/4-16 (SAE#8) work ports
• Adjustable built-in relief valve, set at 2000 PSI
• Open center, spring centered
• Load holding cylinder port check valves
• Field conversion kits part numbers:

1V2566-power beyond sleeve (7/8-14, SAE #10)
1V2572-closed center plug
1RO035-no relief plug for closed center
1V2609-manual detent kit (2 pos. w/spring centering)

 The CROSS SCD2E series is an open center valve featuring manual control in the forward position with pressure operated kickout to return handle to neutral automatically at the end of the return stroke. Ideal for log splitters.

• Single spool, 3 pos., 4-way, pressure release detent IN
• 2000 psi fixed relief.
• 30 gpm flow rating
• 3/4" NPTF in & out
•  1/2" NPTF work ports
• Weight 9 lbs.

The CROSS SQV series valve is a 2-position, 3 port valve designed to alternately operate a pair of agricultural guide marker cylinders.

• 2500 PSI operating pressure (3000 psi Max Surge)
• 3/4-16 (SAE #8 Ports)
• 2 GPM flow rating
• Weight 9 lbs.

The CROSS SVS series valves are 2-position, 3 port units designed for maximum performance at an economical price. These valves can be used for uni-directional cylinder and motor control or for selecting one of two circuits from a single pump.

.

• 2500 PSI operating pressure
• Knob actuator
• Hard chrome plated spool

The CROSS SSD4 series valves are 6 way, 2-position units with cast-in metering notches for smooth operation. They provide an economical way of diverting flow to two separate hydraulic circuits.

• 2500 PSI operating pressure
• 40 GPM flow rating
• 1" NPTF ports
• Complete handle assembly
• Weight 9 lbs.

Shown with knob

The CROSS SRC series dual differential type relief valves are used to protect equal size cylinders or motors from external or shock loads. Oil which passes from one relief valve flows directly to the opposite side of the circuit, thus preventing cavitation. The swing circuit on a backhoe is a good application example

• 500-3000 PSI adjustment range
• 30GPM flow rating
• 3/4" NPTF ports

The CROSS SRD series differential  poppet type relief valves provide long life and smooth performance at an economical price. The valve is used to protect pumps from damage due to over-pressurization.

• 500-3000 PSI adjustment range
• 30GPM flow rating
• 3/4" NPTF ports

Phone 406-761-8079 or 800-823-4937
Fax 406-452-6056

Email  sales@northernhydraulics.net

Northern Hydraulics Inc.
2600 17th St NE
Black Eagle, MT 59414