FEATURES:

• BORE SIZES 1.5" UP TO 6"
  • Available bores 1.5", 2", 2.5", 3.25", 4", 5", 6"
    with various types of mountings and rod end accessories.

• HIGH STRENGTH PISTON ROD
  • Piston rods are hard chrome plated to
    resist scoring and corrosion and assure
    maximum seal life.
    

• NON-ROTATING RODS AVAILABLE
  • Hexagonal rods eliminate the need for whirl-stop
    guides. We have an entire series of non-rotating rod
    cylinders, which enable construction of more
    functional systems.

• MAGNET INTEGRATED IN PISTON
  • Pistons come equipped with a magnet. Mounting
    a magnetic proximity switch will convert a basic
    cylinder into a position indicator
    without internal modification.
    
• ADJUSTABLE CUSHIONS
  • Cylinders come standard with adjustable cushions
    in both the head and cap.
    
    

FEATURES:

• Parallel grippers (SH3 Series) are designed for use in industrial applications such as robotics, pick & place, transfer, clamping and accurate positioning.
• Compact size, light in weight and simple in structure are features of all models.
• Internally, action lever supported by bearings control the parallel finger movement.
• All models (except SH3-pc02) can be mounted with Auto Switch capability.

FEATURES:

• Angular gripers (USV2 Series) are designed for use in industrial applications such as robotics, pick & place, transfer, clamping and accurate positioning.
• Compact in size, light in weight and simple in structure are features of all models.
• Low cost design.
• Toolings are easily attached with slotted and tapped in body.
• Al models (except Single Acting/Normally Closed type) can be mounted with Auto Switch capability.
• Shank side mounting female thread is compatible with rod male thread of interchangeable cylinder.

FEATURES:

• AIRPRO air motors are designed for for use in industrial applications such as powering air driven machinery, raising foundry copes and drags, rotating a turntable, mixing paint, powering cranes, valve actuation and power source for mechanical hands.
• Speed could be easily controlled by flow adjustment from 100 r.p.m. up to Max. speed.
• Compact in size, light in weight and simple in structure are features of all models.
• AIRPRO air motors can be mounted any way you like - Flange mounting and foot mounting are available.
• Air lines should be equipped with lubricators. Mount the lubricator as close as to the motor as possible.

FEATURES:

• BORE SIZES 1.25" UP TO 3.25"
  
  • Available bores 1.25", 1.5", 2", 2.5", 3.25".
    
• ALUMINUM BODIES
  
  • Lightweight, compact hydraulic cylinders
    with bodies constructed of a special aluminum alloy.
    Operating at up to 1500 PSI pressure (10MPa).
    
• MAGNETIC PROXIMITY SWITCH
  
  • Magnetic proximity switch (Reed type, Hall Effect type)
    is available as standard. (Cylinder dimensions are the same for
    both standard and switch set type).

• INTERCHANGEABLE
  
  • Mounting dimensions completely interchangeable
    with U160S-1 Series, which has a steel body
    

FEATURES:

• BORE SIZES .75" UP TO 3.25"
  
  • Available bores .75", 1", 1.25", 1.5", 2", 2.5", 3.25".
    
• STEEL BODIES
  
  • Lightweight, compact and durable hydraulic
    cylinders with bodies constructed of steel.
    Operating at up to 2300 PSI pressure (16MPa).
    
• SMALLER SIZE
  
  • With no mounting accessories needed,
    the mounting space is smaller than the
    conventional cylinder

• IMPROVED WEAR RESISTANCE
  
  • Rod gland constructed of a special copper
    alloy for improved wear resistance

• INTERCHANGEABLE
  
  • Mounting dimensions completely interchangeable
    with U100S-1 Series, which has an aluminum body

Phone 406-761-8079 or 800-823-4937
Fax 406-452-6056

Email sales@northernhydraulics.net

Northern Hydraulics Inc.
2600 17th St NE
Black Eagle, MT 59414